Stopping Bluetooth Wave Transmission; Answering A Call Automatically; Setting The Automatic Rejection Function - Pioneer AVIC-F700BT Operation Manual

( Using hands-free phoning
2 Adjust volume to touch the sliders of
[Phone Ringtone] and [Phone Voice].
Chapter
)&
1 Touch [Phone Settings] on the "Phone
Menu".
~
For details, refer to Displaying the Phone
Menu on page 52.
2
Touch any key next to [Auto Answer
Preference] (such as [Off], [After 3 seconds]
keys).
Auto Answer Preference selection appears.
3 Touch the item to configure.
[Phone Ringtone]:
This setting controls the incoming ring tone
volume.
[Phone Voice]:
This setting controls the incoming voice vo-
lume.
o
Phone volume varies depending on the in-
coming caller's phone, volume setting and
other conditions.
~
For details concerning operations, refer
to
Answering an incoming call
on page
56.
Stopping Bluetooth wave
transmission
You can stop transmission of electric waves by
turning off the Bluetooth function.
If
you do
not use the Bluetooth wireless technology, we
recommend selecting [Off].
1 Touch [Phone Settings] on the "Phone
Menu".
~
For detai Is, refer to
Displaying the
Phone
Menu on page 52.
2
Touch [Off] on [Bluetooth On/Off].
Touching [Bluetooth On/Off] switching be-
tween [On] and [Off].
Answering a call automatically
The navigation system automatically answers
an incoming call to the cellular phone. You
can answer a call while holding the steering
wheel while you are driving.
[Off]: No automatic response. Respond manu-
ally
[Immediately]: Answers immediately
[After 3 seconds]: Answers after three sec-
onds
[After 6 seconds]: Answers after six seconds
[After 10 seconds]: Answers after ten sec-
onds
Setting the automatic rejection
function
If
this function is on, the navigation system
automatically rejects all incoming calls.
1
Touch [Phone Settings] on the "Phone
Menu".
~
For details, refer to Displaying the Phone
Menu on page 52.
2 Touch [Refuse All Calls].
Touching [Refuse All Calls] switches between
[On] and [Off].
o
If
both the automatic reject and automatic
answer functions are set to [On], automatic
reject is prioritized and all incoming calls
are automatically rejected.
En
em