Entrance Telephone - Door Opener - Siemens HiPath 1100 User Manual

Step by step
4. When an MSN number is assigned
to an extension number. The extension assigned is
forwarded to another extension. The incoming MSN
call will ring at the call forwarding extension destina-
tion. If the extension that received the forwarded call
does not answer after a specified timeout (default of
30 seconds), the call is rerouted to the Overflow ex-
tension.
5. When an MSN number is assigned
to an extension number. The extension assigned is
not able to receive a call forwarding signal. For ex-
ample, it may be configured for data protection.

Entrance telephone - door opener

This feature lets the system allow certain pre-pro-
grammed extensions to order a door to open using an
entrance telephone device equipped with door opening
control.
Required: The entrance telephone extension has per-
mission to open the door.
A call is received from the entrance telephone
n;
,
Lift the handset.
s
,
Identify the person who wants to enter.
d
( )
With standard MF telephones, first press the Flash key.
qje
Enter the code to open the door.
w
Wait for a confirmation tone.
t
Replace the handset.
The extension is in sleep mode and opens the door
In this case the entrance telephone will receive a call
signal.
n
Lift the handset.
d
( )
With standard MF telephones, first press the Flash key.
[1] Extensions authorized to open doors are configured during system
programming (see entrance telephone in the Programming manu-
al).
An urgent call warning tone is played when the extension config-
ured to answer the entrance telephone is busy.
Miscellaneous functions
1
75