Disa - Siemens HiPath 1100 User Manual

Step by step
1

DISA

DISA (Direct Inward System Access) is a feature that al-
lows you to make an external call from an external tele-
phone (as if it was an extension) through your system.
In addition, the following features can be activated or
deactivated:
• "Internal"
• "Deactivating a feature"
• "Conference"
• "Night service"
• "Suffix dialing"
• "Entrance telephone - door opener"
• "Electronic lock"
• "System speed dial"
• "Individual speed dialing"
• "Flash time detection for extensions"
• "Do not disturb"
Required: The telephone used cannot be part of the sys-
tem, that is, it cannot be an extension.
n
Lift the handset.
p
Call the HiPath 1100 by entering a DISA MSN number
(see MSN DISA in the programming manual or the Hi-
Path 1100 Manager) previously provided by a support
technician).
w
Wait for a continuous tone.
p
Enter the extension number for the user with a DISA
permission (see DISA permission Programming manu-
al, in the programming manual).
p
Enter the current 5-digit password for the electronic
lock (default is: 00000).
[1] The HiPath 1100 allows only one DISA call at a time. When there
is a DISA call in progress, a second call to a DISA external line or
one with a DISA answering mode is treated as a regular call.
The DISA line is available for another call as soon as the phone is
placed back on the hook.
If a call is received over an external line configured as a Fax/DID and
DISA, the call is answered by the Fax/DID if this facility is available
at that moment.
You can program an external analog DISA line to be activated for
certain time periods (see External DISA Line, in the programming
manual).
TAPI only monitors physical ports. To operate correctly, a DISA fea-
ture must use special ports, and those cannot be monitored. If a
physical port is used when the DISA feature is activated, the TAPI
will be able to monitor it.
Functions used when making calls
27