Section 3 - Configuration
Save to Local Hard Drive:
Load from Local Hard
Drive:
Restore to Factory Default:
Reboot Device:
Click Apply on this screen to restore the factory default settings. After confirmation, the system will restart and require
the Setup Wizard SE program to locate the IP address of the DCS-5605/5635.
D-Link DCS-5605/5635 User Manual
Clicking Save Configuration allows
you to save a copy of the camera's
current configuration to a location
which you specify.
If you have previously backed up
a your camera's configuration,
you can restore it using this menu.
Click Browse, and locate the file
on your computer. Click Load
Configuration to restore the backup.
This will erase your current settings.
This option will reset the camera
back to its factory default settings.
This will erase your current settings.
Clicking this button will restart the
camera.
System
71