Recording - D-Link DCS-5605 User Manual

Section 3 - Configuration
This option allows you to configure recording settings and scheduling. You can record video to a Secure Digital card
inserted into the SD card slot, or you can have video saved to a Samba network drive.
Enable Recording:
SD Card:
Samba Network Drive:
Samba Auth:
User Name:
Password:
Password Confirm:
Server:
Shared Folder:
Test:
D-Link DCS-5605/5635 User Manual
Check this checkbox to enable the recording feature.
After enabling recording, you will need to select a
location to record to (SD Card or Samba network drive),
and you will need to select a scheduling method.
Selecting this will allow you to record to an SD Card
inserted into the SD slot on the right side of the unit.
When recording to an SD Card, you can only use Event
Based recording.
Selecting this will allow you to record to a Samba
network drive on your wired or wireless network.
Here, select Anonymous if no user name or password
is required to access your Samba drive. If you require a
user name and password to log in to your Samba drive,
select Account and fill in the following information:
Enter the user name required to access your Samba
drive.
Enter the password required to access your Samba
drive.
Re-enter the password required to access your Samba
drive for verification.
Enter the name or the IP of the server your Samba
drive is on.
Enter the name of your shared folder.
This button will try to make a connection to the Samba network drive, and will let you know if the settings work.

Recording

61