Cvbs Function (Only For Some Models); System Service - D-Link DCS-F Series User Manual

Camera User Manual

CVBS Function (Only for Some Models)

Preparation
Connect a display device to the VIDEO OUT port.
Description
When the analog output function is enabled, the IP camera can send analog signals to a video server or
display device through the VIDEO OUT port.
Procedure
Step 1 Choose Configuration > Device > CVBS.
The BNC Video Output page is displayed, as shown in Figure 4-13.
Step 2 Click the button on to enable BNC Video Output.
Step 3 Click Apply.
The message "Apply success!" is displayed. And the system saves the settings.
----End

System Service

Procedure
Step 1 Choose Configuration > Device > System.
The System page is displayed, as shown in Figure 4-14.
Issue V1.0 (2023-02-10)
BNC Video Output Page
Configure the Device
63