Snapshot - D-Link DCS-5605 User Manual

Section 3 - Configuration
Here, you can set the camera to take snapshots when motion is detected and/or when a signal is sent to the DI input.
Snapshots can be sent to an e-mail address and/or to an FTP server.
Enable Snapshot:
Motion Detector:
D/I Signal:
E-mail Address:
User Name:
Password:
SMTP Mail Server:
Sender E-mail Address:
Recipient E-mail Address:
D-Link DCS-5605/5635 User Manual
Check this box to enable the snapshot feature.
This will set the camera to take a snapshot whenever
motion is detected.
This will set the camera to take a snapshot whenever
a signal is sent to the D/I input. You can find more
information about the DI/DO interface at the end of
this document.
When checked, the camera will send the snapshots
it takes to the e-mail address specified in the
following text boxes. If you do not know what to enter
for the User Name, Password, or SMTP Mail Server,
contact your e-mail service provider for details.
Enter the username or login name for your e-mail
account.
Enter the password for your e-mail account.
Enter the SMTP server for your e-mail account.
Enter the e-mail address you want to appear as the
"From:" e-mail address in the snapshot e-mail.
Enter the e-mail address you want to send your snapshots to.

Snapshot

64