D-Link DCS-5605 User Manual page 70

Section 3 - Configuration
Administrator's password:
User name:
User List:
Delete user:
Enable OSD:
Label:
Show Time:
Camera Name:
LED Light:
Calibrate the Device:
D-Link DCS-5605/5635 User Manual
Password for the Administrator's account. The administrator password must be entered in twice for
confirmation.
Create a new user for accessing the video image. A maximum of twenty user accounts can be added. The
new user name will be displayed in the list of user names below.
Administrator can edit or delete users here by selecting the user name.
Remove a user from the user list.
Check this box to enable the On Screen Display which can include the camera label and time. The OSD will
be displayed in the black bar above the video window with a timestamp.
Type a label for the camera which will be displayed at the top of the video feed's on screen display.
Displays the camera's current time in the on screen display area.
Type a name to identify your camera. This name will appear in the OSD unless a label is specified.
The LED lights on the side of the device can be enabled or disabled. When enabled, they help to indicate
the status of the camera. However, this information is readily available to anyone who can see the device.
Therefore, for security reasons, you may wish to disable the LED lights to prevent others from observing the
camera status.
Clicking this button will calibrate the camera so that the P/T/Z apparatus functions correctly. The camera is
automatically calibrated whenever it is powered on and initialized or reset. Should the camera's pan, tilt, and
zoom functions begin to behave incorrectly, or if the device has been jarred or handled improperly, you may
need to recalibrate the camera manually by pressing this button.
70