Enabling Upnp For Windows ® Xp - D-Link DCS-5605 User Manual

Section 3 - Configuration
Enabling UPnP for Windows XP
®
UPnP (Universal Plug and Play) is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. The
DCS-5605/5635 is an UPnP enabled Internet camera. If your operating system
is UPnP enabled, the device will be easier to configure. If you do not want to
use the UPnP functionality, it can be disabled by unchecking the Enabled UPnP
checkbox on the Setup > Network Setup page. Use the following steps to
enable UPnP settings only if you are running Windows XP. If you are running
®
Windows 98/2000, UPnP is not available.
®
Go to Start > Settings. Click Control Panel.
Click Add or Remove Programs
D-Link DCS-5605/5635 User Manual 26