Image Setup - D-Link DCS-5605 User Manual

Section 3 - Configuration
The options in Image Setup allow you to adjust the settings for your IP camera sensor and image.
Brightness:
Saturation:
Contrast:
Sharpness:
B/W:
Flip:
Mirror:
Auto Gain Control:
Back Light Compensation:
2D Noise Reduction:
D-Link DCS-5605/5635 User Manual

Image Setup

This adjusts the brightness of the camera image. This is set to 35 by default.
This adjusts the color saturation of the camera
image. This is set to 40 by default.
This adjusts the contrast of the camera image. This
is set to 40 by default.
This adjusts the sharpness of the image. This is
set to 10 by default.
Ticking this checkbox will change the camera
image into black and white.
This will flip the image vertically.
This will flip the image horizontally in such a way
that your left side will be on the left side of the
screen and vice versa.
Note: Mirror and Flip can be used if you choose
to mount the DCS-5605/5635 upside down on the
ceiling.
Controls the gain of a signal. Using AGC means that weaker signals receive more gain and stronger signals
receive less gain or none at all.
When an object is in front of bright lights it is difficult for IP camera to capture the image clearly. Selecting this
option can allow objects to become clearer when exposed to bright lights.
2D noise reduction can reduce noise on the image by maintaining smooth edges on moving objects. However,
the noise reduction effect is limited.
51