Motion Detection - D-Link DCS-5605 User Manual

Section 3 - Configuration
This option allows you to set up Motion Detection on your IP camera. In order to use motion detection you must
first check the Enable Video Motion checkbox. You can then click on the video window and draw motion detection
zones by clicking and dragging your mouse. Red areas indicate areas that will be monitored for motion.
Enable Video Motion:
Sensitivity:
Draw Motion Area:
Erase Motion Area:
D-Link DCS-5605/5635 User Manual

Motion Detection

Click this box to enable video motion
detection.
This setting adjusts how sensitive
the camera will be to motion, where
100% will be the most sensitive
setting and 0% will be the least
sensitive setting.
This will allow you to draw motion
detection zones when clicking and
dragging, or erase motion detection
zones when clicking and dragging
depending on which option you have
selected.
Clicking this button will clear all
motion detection zones.
After making any changes, click the
Save Settings button to save your
changes, or click the Don't Save
Settings button to discard your
changes.
55