Network Setup - D-Link DCS-5605 User Manual

Section 3 - Configuration
DHCP:
IP Address:
Subnet Mask:
Default Router:
Primary DNS:
Secondary DNS:
Enable UPnP:
D-Link DCS-5605/5635 User Manual

Network Setup

DCS-5605/5635 will request a new IP address
from the DHCP server every time it restarts.
Once the DCS-5605/5635 is configured, this
radio should be deselected at all times. If
this radio button has been selected and the
connection is lost, run the Setup Wizard SE
find the camera's IP address.
Necessary for network identification.
Used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
Enter the IP address of the router/gateway.
Invalid router settings may cause failed
transmissions to a different subnet.
The primary domain name server that translates
names to IP addresses.
The secondary domain name server which
operates as a backup for the primary DNS.
This option allows a computer to find this
camera through UPnP (Universal Plug &
Play), which will show up under "Network
Neighborhood" without configuration. UPnP
is based on TCP/IP and Internet protocols.
UPnP is a networking architecture that provides
compatibility among networking equipment,
software, and peripherals. The camera is a UPnP enabled device and it will work with other UPnP devices
and software.
47