Image Setup - D-Link DCS-5222LB1 User Manual

Section 4 - Configuration
This section allows you to adjust the image and sensor settings for your camera.
Enable Privacy
The Privacy Mask setting allows you to specify 3
Mask:
rectangular areas on the camera's image to be
blocked/excluded from recordings and snapshots.
You may click and drag the mouse cursor over the
camera image to draw a mask area. Right click on
the camera image to bring up the following menu
options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
Mirror:
This will flip the image horizontally.
Flip:
This will flip the image vertically.
Power Line:
Select the frequency used by your power lines to
avoid interference or distortion.
White Balance:
Use the drop-down menu to change the white
balance settings to help balance colors in different
lighting environments. You can choose from Auto,
Outdoor, Indoor, Fluorescent, and Push Hold.
D-Link DCS-5222LB1 User Manual

Image Setup

38