Image Setup - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure the image settings for your camera.
Enable
If you have lights flickering in your camera video, try enabling
Antiflicker:
antiflicker.
Flip Image:
Check this box to vertically flip the video (upside down).
Mirror:
Check this box to Horizontally flip the video.
Note: If the camera is installed upside down on a ceiling, Flip
Image and Mirror should both be checked
Brightness
Allows you to adjust the brightness level. Select a setting
Control:
between -5 and +5. The default is 0.
Contrast
Allows you to adjust the contrast level. Select a setting
Control:
between -5 and +5. The default is 0.
Saturation
Allows you to adjust the saturation level. Select a setting
Control:
between -5 and +5. The default is 0.
Save Settings:
Click to save your settings.
D-Link DCS-5030L User Manual

Image Setup

27 27