Enabling Upnp ™ For Windows ® Xp - D-Link DCS-5300 User Manual

UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among
™
networking equipment, software, and peripherals. The DCS-5300 is a UPnP
system is UPnP enabled, the device will be easier to configure. If you do not want to use the UPnP
™
can be disabled by unselecting "Enabled" on the DDNS/UPnP
menu. Use the following steps to enable UPnP
XP/Me. If you are running Windows 98/2000, UPnP
Go to Start > Settings.
Click Control Panel
Click Add or Remove Programs
D-Link DCS-5300 User Manual
Enabling UPnP
™
for Windows
™
settings page under "Advanced" in the configuration
™
(Universal Plug and Play) settings only if you are running Windows
is not available.
™
XP
®
enabled Network Camera. If your operating
™
functionality, it
™
®
16