Enabling Upnp For Windows Xp/Me - D-Link DCS-2100+ Quick Installation Manual

Wireless home security internet camera

Hide thumbs Also See for DCS-2100+:

Table of Contents

Enabling UPnP for Windows XP/Me

UPnP is short for Universal Plug and Play, which is a networking architecture that provides

compatibility among networking equipment, software, and peripherals. The DCS-2000 is

a UPnP enabled internet camera. If your operating system is UPnP enabled, the device

will be easier to configure. If you do not want to use the UPnP functionality, it can be

disabled by unselecting "Enabled" on the DDNS/UPnP settings page under "Advanced"

in the configuration menu. Use the following steps to enable UPnP (Universal Plug and

Play) settings only if you are running Windows XP/Me. If you are running Windows 98/

2000, UPnP is not available.

Go to

Start

Settings

Click

Control Panel

Click

Add or Remove

Programs

Table of Contents