Using The Inbox; Accessing The Inbox - Nortel 1120E User Manual

Using the Inbox

Follow these procedures to use the Inbox.
The IP Phone 1120E has a dedicated fixed key for the Inbox. The system
logs the incoming key number, time and date, as well as the display shown
on the IP Phone at the time of the incoming call. The information from the
display is captured only if the call lasts for more than two seconds.
The Inbox can store a maximum of 10 calls. When the maximum is reached,
the oldest call is dropped. Calls appear in the list in the order in which they
were received, with the most recent call at the top of the list.
The Inbox call display consists of a time or date stamp, and a name or
number. A time stamp appears beside calls you receive on the same day
on which you view the Inbox. A date stamp appears beside calls that arrive
prior to the day of viewing. If no name or number was extracted from the
display of the incoming call, a No Details message appears.
If you have a message waiting or you have missed a call, the message
waiting lamp is turned on. The lamp turns off after you check your Inbox or
retrieve the waiting message.
See
key.
Navigation
•
•
•
•
•

Accessing the Inbox

Follow this procedure to access and use the Inbox.
If you have a message waiting, the message waiting indicator lamp on the
top right corner of the terminal is turned on. The light is turned off after
you access the Inbox.
Copyright © 2006, Nortel Networks
.
"IP Phone 1120E components" (page 11)
"Accessing the Inbox" (page 73)
"Viewing Inbox call information" (page 74)
"Storing a number from the Inbox" (page 74)
"Using the Inbox to make a call" (page 75)
"Resetting the Inbox" (page 76)
Nortel IP Phone 1120E User Guide
NN10300-022 01.02 Standard
(I)SN09U 20 October 2006
Carrier VoIP
for the location of the Inbox
Nortel Networks Confidential
73