Setting The Date Format - Nortel 2004 User Manual

Step
1
2
3
4

Setting the date format

Follow this procedure to set the date format the terminal uses to display
the current date. When month (mmm) is selected, the display shows an
abbreviated name, Oct for example, and not a number.
The date format choices are:
•
•
•
•
Step
1
2
3
4
Copyright © 2006, Nortel Networks
.
Action
From the main menu, open the Time menu.
From the Time menu, select and open Time Format.
The Time Format screen appears.
Scroll through the Time Format options to select the format you want.
A check mark appears beside the format currently in use.
To enable a format, select it, and press Ok.
A check mark appears beside the option to indicate that it is enabled.
The time is displayed in the selected format. You return to the
previous screen.
ddmmm
mmmdd
mm/dd
dd/mm
Action
From the main menu, open the Time menu.
From the Time menu, select and open Date Format.
The Date Format screen appears.
Scroll through the Date Format options to select the format you want.
A check mark appears beside the format currently in use.
To enable a format, select it and press Ok.
A check mark appears beside the option to indicate our choice. The
date is displayed in the selected format. You return to the previous
screen.
Nortel IP Phone 2004 User Guide
NN10300-009 06.04 Standard
(I)SN09U 20 October 2006
—End—
Carrier VoIP
Setting the date format 37
Nortel Networks Confidential