Transferring A Call; Using The Call Park Feature - Nortel 2004 User Manual

52 While on an active call

Transferring a call

Follow this procedure to transfer a call to another extension.

Using the call park feature

Use the call park feature to hold temporarily (park) and retrieve a call from
any telephone. Using call park does not tie up a line.
Copyright © 2006, Nortel Networks
.
1 Press the Transfer key in the upper display area. The
other party is on hold and a dial tone sounds. The LCD
indicator light flashes steadily.
2 Dial the DN to which the call is to be transferred.
3
When that number rings or a person answers, announce
the call and then press the Transfer key to connect the
calling party.
4 To return to the original call, if the transfer is incomplete,
press the line (DN) key (next to the LCD indicator) to
reconnect to the original call.
If the call is not answered after it is transferred, press the
Goodbye key and then press the flashing extension.
1 To park a call to another extension, during an active call,
press the Park key in the upper display area.
2 Look at the display. A System Park extension is displayed.
Take a note of the number.
3 Press the Park key.
4
Go to any phone and retrieve the call by dialing the System
Park number that was displayed.
Carrier VoIP
Nortel IP Phone 2004 User Guide
NN10300-009 06.04 Standard
(I)SN09U 20 October 2006
Nortel Networks Confidential