Conference Calls; Setting Up A Conference Call - Nortel 2004 User Manual

Conference calls

This section describes features that enable conversations between more
than two people.

Setting up a conference call

The conference feature enables you to add up to five people to an
established call (either internal or external). Follow this procedure to engage
in a conference call.
Copyright © 2006, Nortel Networks
.
1
While on a call, press the Conference key in the upper display
area to place the party on hold. You receive a dial tone.
2 Dial the number of the person you want to add to the
conference call. You can talk privately to the person you are
adding at this time to announce the conference.
3
Press the Conference key a second time to conference all
parties.
4
Repeat the step to include up to a total of six people.
If you make a mistake dialing, or the party does not want to be
included in the conference, Press the extension key on which
the conference is being held and you will be reconnected to
the conference.
Carrier VoIP
Nortel IP Phone 2004 User Guide
NN10300-009 06.04 Standard
(I)SN09U 20 October 2006
55
Nortel Networks Confidential