3. Scroll through the Time Format options to select the format you want. A check mark
appears beside the format currently in use.
4. To enable a format, select it and press Ok. A check mark appears beside the option,
to indicate that it is enabled. The time is displayed in the selected format. You return
to the previous screen.
Setting the Date Format
Follow this procedure to set the date format the terminal uses to display the current date.
When month (mmm) is selected, the display shows an abbreviated name, Oct for
example, and not a number.
The date format choices are:
• mmmdd
• ddmmm
• mm/dd
• dd/mm
1. From the main menu, open the Time menu.
2. From the Time menu, select and open Date Format.
3. Press Ok. The Date Format screen appears.
4. Scroll through the Date Format options to select the format you want. A check mark
appears beside the format currently in use.
5. To enable a format, select it and press Ok. A check mark appears beside the option,
to indicate that it is enabled. The date is displayed in the selected format. You return
to the previous screen.
Resetting the Default Time
Follow this procedure to reset the terminal to the default time.
1. From the main menu, open the Time menu.
2. Form the Time menu, select and open Reset. A confirmation screen appears.
3. Confirm the action. The terminal reverts to the default time settings. You return to the
previous screen.
Using the Directory
Follow procedures in this section to use the directory feature (see Fig 1 or Fig 2).
Note: 1120E/1140E Phone will store up to sixteen directory entries.
Nortel 1120e-1140e User Guide
Northwestern University Information Technology
Page 13
www.it.northwestern.edu
2/18/2008