Setting The Date Format; Carrier Voip; Nortel Ip Phone 1120E User Guide (Cicm; Nn10300-022 02.01 Standard - Nortel 1120E User Manual

Step
1
2
3
4

Setting the date format

Follow this procedure to set the date format the terminal uses to display
the current date. When month (mmm) is selected, the display shows an
abbreviated name, Oct for example, and not a number.
The date format choices are:
•
•
•
•
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
Action
From the Main menu, open the Time menu.
From the Time menu, select and open Time Format.
The Time Format screen appears.
Scroll through the Time Format options to select the format you want.
A check mark appears beside the format currently in use.
To enable a format, select it and press Ok, or press the send key.
A check mark appears beside the option, to indicate that it is
enabled. The time is displayed in the selected format. You return to
the previous screen.
mmmdd
ddmmm
mm/dd
dd/mm
Action
From the main menu, open the Time menu.
From the Time menu, select and open Date Format.
Press Ok, or press the send key.
The Date Format screen appears.
Scroll through the Date Format options to select the format you want.
A check mark appears beside the format currently in use.
To enable a format, select it and press Ok or press the send key.

Nortel IP Phone 1120E User Guide (CICM)

NN10300-022 02.01 Standard

(I)SN10 15 June 2007
—End—

Carrier VoIP

Setting the date format 67