D Displaying The Received Call Record - Icom IC-F3062T Instruction Manual

4
BIIS OPERATION
D D Group call
q When a group call is received;
• Beeps sound.
• " " appears and the mute is released.
• The programmed text message (e.g."G G R R O O U U P P ") and the calling sta-
tion ID (or text) is displayed when the indication mode is 2 lines.
• The programmed text message (e.g."G G R R O O U U P P ") and the calling
station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.
• " " appears or blinks depending on the setting.
Appears
GROUP
CALL BIFN CALL
w Push and hold [PTT], then speak into the microphone at a
normal voice level.
• TX indicator lights red.
NOTE: Only one station is permitted to speak.
e Release [PTT] to return to receive.
• BUSY indicator lights green while receiving a signal.
r To finish the conversation, push [Moni(Audi)] to send the
'Clear down' signal.
• Either station can send a 'Clear down' signal.
• "C C L L R R D D O O W W N N " is displayed for 2 sec. (approx.)
• " " disappears and the transceiver returns to the standby con-
dition.
18
Appears or
blinks
1120
BIFN TXC TXCE TXCE
D D Displaying the received call record
— Queue indication
The transceiver memorizes the calling station ID in the mem-
ory. Up to 3 calls can be memorized, and the oldest call
record is erased when a 4th call is received. However, once
the transceiver is powered OFF, the all records are cleared.
q Push and hold [Digital Button] for 1 sec.
• Displays following indication.
When a record is available
< >
QUEUE
–QUEUE!–
CALL CALL BIFN BIFN TXC TXCE TXCE
When no record is available
< >
QUEUE
NO QUEUE
CALL CALL BIFN BIFN TXC TXCE TXCE
w Push [CH Up] or [CH Down] to select the desired call.
e Push and hold [Digital Button] for 1 sec. again to return to
the standby condition.
• When no operation is performed for 30 sec., the transceiver
returns to the standby condition automatically.