D Displaying The Received Call Record - Icom IC-F3160 SERIES Operating Manual

D Group call
q When a group call s receved;
• Beeps sound.
• " " appears and the mute s released.
• The programmed text message (e.g."GROUP") and the callng sta-
ton ID (or text) s dsplayed when the ndcaton mode s 2 lnes.
• The programmed text message (e.g."GROUP") and the callng
staton ID (or text) s dsplayed alternately when the ndcaton
mode s 1 lne, dependng on the settng.
• " " appears or blnks dependng on the settng.
Appears
4001
1111
CALL BIIS TXC
w Push and hold [PTT], then speak nto the mcrophone at
a normal voce level.
• TX ndcator lghts red.
NOTE: Only one staton s permtted to speak.
e Release [PTT] to return to receve.
• BUSY ndcator lghts green whle recevng a sgnal.
r To finsh the conversaton, push [Moni(Audi)] to send the
'Clear down' sgnal.
• Ether staton can send a 'Clear down' sgnal.
• "CLR DOWN" s dsplayed for 2 sec. (approx.)
• " " dsappears and the transcever returns to stand-by operaton.
Appears or
blinks
Group ID
Calling station ID
TXCE
BIIS 1200 OPERATION

D Displaying the received call record

— Queue indication
The transcever memorzes the callng staton ID n the mem-
ory. Up to 3 calls can be memorzed, and the oldest call re-
cord s erased when a 4th call s receved. However, once
the transcever s powered OFF, the all records are cleared.
q Push and hold [BIIS Button] for 1 sec.
• Dsplays followng ndcaton.
When a record is available
<
QUEUE
–QUEUE!–
CALL BIIS
When no record is available
<
QUEUE
NO QUEUE
CALL BIIS
w Push [CH Up] or [CH Down] to select the desred call.
e Push and hold [BIIS Button] for 1 sec. agan to return to
stand-by operaton.
• When no operaton s performed for 30 sec., the transcever re-
turns to stand-by operaton automatcally.
2
>
TXC TXCE
>
TXC TXCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4