Gaggenau VL 051-107 Operating And Assembly Instructions Manual

Gaggenau VL 051-107 Operating And Assembly Instructions Manual

Automatically extendible hob ventilator
Hide thumbs Also See for VL 051-107:

Advertisement

Operating and assembly instructions
VL 051-107
Automatically extendible hob ventilator
3

Advertisement

Table of Contents
loading

Summary of Contents for Gaggenau VL 051-107

  • Page 1 Operating and assembly instructions VL 051-107 Automatically extendible hob ventilator...
  • Page 2: Table Of Contents

    VL 051-107 Preface 1. Important notes Page 3-4 1.1 For your safety Page 3 1.2 Operating for the first time Page 4 1.3 About use Page 4 2. Structure and operating principle Page 5 2.1 Structure of the appliance Page 5 2.2 Control panel...
  • Page 3: Preface

    Preface With your new hob ventilator, working in the kitchen will be even more fun. The appliance offers you the following advantages: – Kitchen vapours and fats are sucked away directly where they arise. – The advantages of a hob ventilator are combined with those of a single-point extractor.
  • Page 4: Important Notes

    1. Important notes 1.1 For your safety specialist dealer or your responsible Gaggenau after-sales service. Repairs must be carried out Damaged appliances must not be operated. by authorised specialists, thus ensuring electrical The appliance must only be connected by an safety.
  • Page 5: Operating For The First Time

    This appliance is labelled in accordance 1.2 Operating for the first time with the European Directive 2002/96/EG Before operating the appliance for the first time, concerning used electrical and electronic please pay attention to the following notes: appliances (waste electrical and electronic equipment –...
  • Page 6: Structure And Operating Principle

    2. Structure and operating principle 2.1 Structure of the appliance 1 Grease filter 2 Lid 3 Swivel arm 4 Tub 5 Control panel Fig. 2 2.2 Control panel 6 “Height adjustment" control knob 7 Grease filter pilot lamp 8 “Power level" control knob with the positions 0, 1, 2, 3, after-running stage and grease filter indication Fig.
  • Page 7: Operation

    3. Operation Switching on – Turn the “Power level" control knob to the required position on the right. The boom moves automatically to the frying position, and it can then be extended continuously up to its fully extended position (cooking position) by turning the “Height adjustment"...
  • Page 8: Cleaning And Care

    4. Cleaning and care Caution: Avoid sharp and caustic cleaning agents as well as brushes and abrasive cleaners. Clean the stainless steel tub with mild rinsing detergent and apply stainless steel care agent to the metal surfaces using a soft cloth. Only clean the switch panel with a soft cloth.
  • Page 9 Swivel arm cleaning If the swivel arm gets very dirty, it can be dis- mantled for cleaning. You can clean the swivel arm in a dishwasher at a maximum temperature of 65°C. Proceed as follows: – Turn the “Height adjustment" control knob to the right to extend the boom slightly.
  • Page 10: Maintenance

    If the power supply is in proper working order, but the appliance is nevertheless not functioning, then please contact your specialist dealer or your responsible Gaggenau after-sales service. Specify the appliance type. To this end, have a look at the rating plate, which is included with the operating and assembly instructions.
  • Page 11: Assembly Instructions

    6. Assembly instructions 6.1 Technical data Adequate ventilation of the room must be ensured whenever a hob ventilator is operated Rating: 260 W simultaneously with devices that are operated with Weight: 19 kg non-electrical energy. Official regulations must be A fan module is needed for suction extraction. observed with regard to removal of the exhaust air.
  • Page 12: Electrical Connection

    When operated next to gas appliances, the swivel arm must be extended at least to the top edge of the pan as otherwise the flame of the gas burner will be impaired. VL 051-107 FD xxxx xxxxxx AC 220-240V / 50Hz...
  • Page 13: Installation

    6.5 Installation The hob ventilator can be installed next to one or between two built-in Vario appliances. 41 3 Choose the suitable connection variant (see Page 13) before beginning with installation. – Produce the recess for the appliance. Proceed as indicated on the installation sketch and the dimension table (Fig.
  • Page 14 Worktop height ≥ 90 cm, variable position of the fan module – Saw out the base plate in the built-in cabinet for the fan module. – Place the fan module in the base cabinet. Refer to the operating instructions of the fan module for details of how to install it.
  • Page 15 GAGGENAU HAUSGERÄTE GMBH CARL-WERY-STR. 34 · D - 81739 MÜNCHEN Y (0 89) 45 90 - 03 FAX (0 89) 45 90 - 23 47 www.gaggenau.com...

Table of Contents