Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gaggenau VL414115
Summary of Contents for Gaggenau VL414115
- Page 1 Gaggenau en User manual and installation instructions VL414115 Extractor hood...
-
Page 2: Table Of Contents
en Safety 1.2 Intended use Table of contents This appliance is designed only to be built into kitchen units. Read the special installation instructions. INFORMATION FOR USE The appliance can only be used safely if it is Safety .............. 2 correctly installed according to the safety in- structions. -
Page 3: Safety
Safety en WARNING ‒ Risk of suffocation! WARNING ‒ Risk of poisoning! Children may put packaging material over Risk of poisoning from flue gases being their heads or wrap themselves up in it and drawn back in. Room-air-dependent heat-pro- suffocate. ducing appliances (e.g. gas, oil, wood or coal- ▶... -
Page 4: Avoiding Material Damage
en Avoiding material damage ▶ Do not install the appliance near a solid ▶ Call customer services. → Page 20 fuel heating appliance (e.g. wood- or coal- Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be burning) unless the heating appliance has a sealed, non-removable cover. -
Page 5: Environmental Protection And Saving En- Ergy
Environmental protection and saving energy en 3 Environmental protection and saving energy 3.1 Disposing of packaging If cooking produces large amounts of steam, select a higher fan speed in good time. The packaging materials are environmentally compat- ¡ The odours are distributed around the room less. ible and can be recycled. -
Page 6: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Appliance Switching on interval vent- ilation You can find an overview of the parts of your appliance Resetting the saturation here. indicator 5.3 Indicator on the illuminated ring The control knob has an illuminated ring with various display functions. -
Page 7: Accessories
Accessories en 6 Accessories Use original accessories. These have been made espe- cially for your appliance. Accessories Order number Ventilation moulding for AA414010 operation beside a VG415/425 gas appli- ance 7 Before using for the first time Configure the settings for initial start-up. Clean the ap- 7.2 Setting regenerable odour filters pliance and accessories. -
Page 8: Home Connect
en Home Connect 8.4 Switching on intensive mode 8.9 Fan run-on If particularly strong odours or vapours develop, you During the fan run-on, the appliance continues running can use intensive mode. at a lower fan setting for a short time after switch-off and then switches off automatically. The appliance Push in the control knob and turn it clockwise to ... - Page 9 Home Connect en Download the Home Connect app. To save the setting, exit the Home Connect settings menu in the same way. Turn one notch anti-clockwise to . ‒ Turn the control knob two notches clockwise to ‒...
- Page 10 en Home Connect In order to implement a setting, turn the control 9.3 Changing the Home Connect settings knob to the required position. In the Home Connect settings menu, you can connect → "Overview of the Home Connect settings", your appliance to Home Connect and implement the Page 10 setting for connecting to the Wi-Fi home network.
- Page 11 Home Connect en Knob position Setting Switching LAN or Wi- You can switch off the LAN or Wi-Fi on your appliance at any Fi on or off time (e.g. to save energy during a holiday). The connections to the home network and to the hob remain saved.
- Page 12 en Home Connect Connecting more mobile devices to another 9.6 Logging in to your home network Home Connect account automatically (WPS) Requirement: A mobile device is connected to the ap- Requirement: You require a router that has WPS func- pliance. The appliance is in the Home Connect settings tionality.
- Page 13 Home Connect en Open the Home Connect settings menu. 9.12 Resetting the Home Connect → "Opening or closing the Home Connect settings connection menu", Page 9 You can reset the connections you have saved on your a The illuminated ring on the control knob lights up home network and on the hob at any time. blue.
- Page 14 en Connecting the downdraft ventilation to the hob ¡ The current software and hardware version of your 9.15 Data protection appliance. Please see the information on data protection. ¡ Status of any previous reset to factory settings. The first time your appliance is registered on a home This initial registration prepares the Home Connect network connected to the Internet, your appliance will functions for use and is only required when you want to...
-
Page 15: Basic Settings
Basic settings en Establishing a direct connection Turn the control knob to another position and then ▶ back to . Requirement: Make sure that the hob is switched on a The illuminated ring on the control knob lights up and is in search mode. Search mode means that the blue. - Page 16 en Basic settings 11.2 Overview of the basic settings You can configure the basic settings for your appliance to meet your needs. Control knob position Function Illuminated ring colour: Illuminated ring colour: Green Yellow Colour selection for the illu- Orange Orange (dark) minated ring around the control knob...
-
Page 17: Cleaning And Servicing
Cleaning and servicing en 12 Cleaning and servicing To keep your appliance working efficiently for a long WARNING ‒ Risk of burns! time, it is important to clean and maintain it carefully. The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. ▶... -
Page 18: Troubleshooting
en Troubleshooting Rinse the grease filters thoroughly. Put the cleaned ventilation grille in position. Allow the grease filters to drain. 12.8 Odour filter for air recirculation mode 12.5 Cleaning grease filters in the Odour filters bind odorous substances in air recircula- dishwasher tion mode. Regularly replaced odour filters guarantee a high level of odour removal. - Page 19 Troubleshooting en WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out ▶ by trained specialist staff. Only use genuine spare parts when repairing the ▶ appliance. If the power cord of this appliance is damaged, it ▶...
-
Page 20: Customer Service
en Customer Service Fault Cause and troubleshooting The appliance runs in The automatic sensor is faulty. automatic mode; the Ensure that there is a connection to the remote fan unit. illuminated ring Turn the control knob to . flashes yellow and Switch the appliance back on. -
Page 21: Declaration Of Conformity
BSH Hausgeräte GmbH hereby declares that the appli- A detailed Declaration of Conformity can be found on- ance with Home Connect functionality conforms to the line at www.gaggenau.com/gb among the additional basic requirements and other relevant provisions of Dir- documents on the product page for your appliance. -
Page 22: Secure Installation
en Installation instructions 17.2 Appliance dimensions 17.3 Secure installation You will find the dimensions of the appliance here Follow these safety instructions when in- stalling the appliance. WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-pro- ducing appliances (e.g. gas, oil, wood or coal- operated heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and dis-... - Page 23 Installation instructions en Risk of poisoning from flue gases being Changes to the electrical or mechanical as- drawn back in. sembly are dangerous and may lead to mal- ▶ If an extractor hood with an open-flued heat functions. production source is installed, the power ▶...
- Page 24 en Installation instructions Round pipes 17.4 Instructions for the electrical connection Round pipes with an inner diameter of 150 mm. In order to safely connect the appliance to the elec- 17.7 General information trical system, follow these instructions. Follow these general instructions during the installation. WARNING ‒ Risk of electric shock! ¡...
- Page 25 Installation instructions en Installation in compressed-wood worktops is not pos- When making the cut-out, allow extra space for the sible. connection strip between the appliances. Observe the installation instructions for the con- ‒ nection strip. The distances to the worktop: When installing in individual cut-outs, ensure that at least 50 mm of material is left between the cut-outs.
- Page 26 en Installation instructions Drill four holes with a diameter of 6 mm. Use 2 screws to secure the retaining plate against rotation. In the case of stone worktops, adhere the retain- ‒ ing plate using heat-resistant, two-component ad- hesive. Ensure that the angle of the cut surface to the work- top is 90°.
- Page 27 Installation instructions en On the rear of the control knob, tighten the retaining Insert the connection strip into the cut-out in the nut using the installation tool provided. worktop. Align the control knob precisely in the zero setting. Insert the downdraft ventilation into the cut-out in the worktop.
- Page 28 en Installation instructions Insert the metal grease filter. Use the control cable to connect the external re- mote fan unit and the downdraft ventilation. Ensure that the plug engages with a click. ‒ Position the ventilation grille. Make sure that the cable is inserted into the control knob correctly.
- Page 29 Installation instructions en open. If you switch on the ventilation system with the window closed, the illuminated ring on the control knob flashes orange and white alternately and the ventilation system remains switched off. If you close the window while the ventilation system is on, the appliance switches the ventilation system off within 5 seconds.
- Page 32 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.gaggenau.com Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom...