CYBEX Bravo 8840 Owner's Manual page 17

Cybex Bravo 8830/8840 Owner's Manual
If Then
1. Remove the four shipping cones using a 3/4" socket or wrench.
2. Place foot pads on each foot of the frame.
3. Remove the four BHSCS securing one of the halves.
BHSCS
BHSCS
4. Move unit to desired location.
8840 cannot fit
5. Reattach the frame halves and securely tighten the four BHSCS.
through a doorway
6. Install Chip-Up Bar. Add Loctite #242 to each BHSCS and threaded
holes. Tighten screws securely and attach insert plugs.
BHSCS
BHSCS
Locknut
Chin-Up
Bar
Insert
plug
17