Listening To Am/Fm/Tv Channels; Directly Selecting A Channel - Uniden UBC330CRS Owner's Manual

Listening to AM/FM/TV Channels

To listen to AM/FM/TV channels, slide the
AM/FM
mode selector to . Then, press the
button at the top of the scanner to select the
desired source (AM for AM Broadcast, FM1 or
FM2 for FM or TV Broadcast).

Directly Selecting a Channel

SVC/DIR
Press to select the direct entry
mode. Use the buttons to step through
s/t
the selected band. The scanner stops on active
channels. TV channels are scanned after FM
channels in FM mode.
You can also enter the channel frequency using
the keypad, enter the channel frequency (for FM
E/
or AM) or the TV channel number and press
PGM .
Listening to AM/FM/TV Channels
18