Replacing The Battery Of The Sf61B - Intermec SF61 User Manual

Chapter 4 — Troubleshooting and Maintaining the SF61B

Replacing the Battery of the SF61B

78
Integrated circuits on printed circuit boards (PCBs) in this
equipment are sensitive to damage by electrostatic discharge
(ESD). Prevent ESD by always wearing skin contact ground
straps firmly attached to the equipment metal base assembly
when working inside of the equipment housing. Failure to
comply may result in damage to PCB components.
To change the battery
1 Loosen the screw holding the battery cover.
2 Remove the battery cover.
3 Disconnect the battery cable and remove the battery.
4 Install the new battery.
5 Install the battery cover and tighten the screw.
Note: Do not apply excessive pressure to the battery cover when
removing and installing the screw (applying excessive pressure on the
battery cover during removal/installation may damage your product).
SF61 Cordless Scanner User's Guide