Configuring Your Scanner From Your Intermec Computer; To Configure The Sf61B From Your Intermec Computer - Intermec SF61 User Manual

Configuring your Scanner From Your Intermec
Computer

To Configure the SF61B from Your Intermec Computer

SF61 Cordless Scanner User's Guide
You can configure many settings for the SF61B from your Intermec
computer using Intermec Settings.
Note: The description in this section is provided as a general
guideline. Consult your Intermec computer's documentation for full
details on how to set up your Bluetooth scanner from your Intermec
computer.
Note: When you first connect to an Intermec computer, only SF61B
settings common to the Intermec computer's internal scanner settings
are changed to the internal scanner's default settings.
1 Establish a Bluetooth connection with your Intermec computer
(see Connecting the SF61B to an Intermec Computer
Chapter 2).
2 On your Intermec computer, start the Intermec Settings
application which may be located in Settings > System folder
depending on your Intermec computer.
3 Select Data Collection > SF61 Scanner
Bluetooth Device Address (BDA) of your SF61B. The SF61B
Bluetooth address is located on the label of your SF61B, see
Bluetooth Device Address Location
4 Configure commands from the SF61 Scanner menu for your
SF61B.
5 Select File > Save Settings. The SF61B is updated with the new
configuration command settings.
6 Close Intermec Settings.
Chapter 3 — Configuring the SF61B Cordless Scanner
in
, where BDA is the
in Chapter 2.
SF61B
57