Call Waiting; Chain Dialing - VTech CS6328-2 User Manual

Telephone operation

Call waiting

When you subscribe to call waiting service from your telephone service
provider, you hear an alert tone if there is an incoming call while you are on
another call.
Press /FLASh to put your current call on hold and take the new call. Press
/FLASh at any time to switch back and forth between calls.

Chain dialing

Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account numbers or access codes) from the directory, call log or
redial list.
To access a number in the directory while on a call:
Press MeNU/
1.
/SeLeCT and then press
2. Press
MeNU
the desired entry.
/SeLeCT to dial the displayed number.
3. Press
MeNU
To access a number in the call log while on a call:
Press MeNU/
1.
> CALL LOG.
/SeLeCT and then press
2. Press
MeNU
the desired entry.
/SeLeCT to dial the displayed number.
3. Press
MeNU
To access a number in the redial list while on a call:
Press reDIAL/
1.
reDIAL/
PAUSe
2. Press /SeLeCT to dial the displayed number.
MeNU
• You cannot edit a directory entry while on a call. For more details about the
directory, see page 25.
• You cannot copy a call log entry into the directory while on a call. For more
details about call log, see page 32.
• You cannot erase a redial entry while on a call. For more details about the
redial memory, see page 22.
• Press OFF/
• When there is more than one handset on a call, only the first handset that
answers the call can access the directory, call log and redial list.
twice to select > DIreCTOrY.
SeLeCT
and then press
SeLeCT
and then press
PAUSe
to browse to the desired entry.
to exit redial, directory or call log when you are on a call.
CLeAr
VOL/
or
VOL/
or
VOL/
or
VOL/ , VOL/
21
VOL/
to scroll to
CID
VOL/
to select
CID
VOL/
to scroll to
CID
or
CID