Speed Dial; Store A Speed Dial Entry; Dial A Speed Dial Number - VTech CS6328-2 User Manual

Telephone operation

Speed dial

You can store up to 10 telephone numbers with names in the speed dial
memory locations you assign from the directory you wish to dial using fewer
keys than usual. You must create an entry in the directory (see page 26)
before you set the speed dial memory location.
The speed dial memory locations are stored in the telephone base and are
shared by all handsets. Changes made to speed dial entries on one handset
apply to all.

Store a speed dial entry

Press MeNU/
1.
2. Press VOL/
/SeLeCT.
MeNU
3. Press VOL/
/SeLeCT.
MeNU
4. Press VOL/
then press
MeNU
VOL/
5. Press
/SeLeCT to confirm.
press
MeNU
• If you choose an existing speed dial entry in step 4, the entry will be
replaced by the new directory entry.
• The entries stored in the speed dial memory are numbered 0 to 9 and share
the memory in the directory.
• If the location is not empty, the new entry replaces the old entry. The old
entry will still be saved in the directory.

Dial a speed dial number

1. Press and hold the dial pad key (0-9) to display the speed dial entry.
2. Press /
FLASh
If the speed dial location you selected is empty, the screen displays < eMPTY > .
when the handset is not in use.
SeLeCT
or VOL/ to select >DIreCTOrY, then press
CID
to select > SPeeD DIAL, then press
or VOL/
CID
or VOL/ to choose the desired speed dial location,
CID
/SeLeCT. The directory list displays.
VOL/
or to choose the desired directory entry, then
CID
or to dial the displayed number.
30