VTech CS6328-2 User Manual page 48

Appendix
handset display screen messages
NO SIGNAL,
CALL ENDED
NOt AVAILABLE
At tHIS tIME
OUt OF RANGE OR
NO PWR At BASE
** PAGING **
PHONE
PLACE IN
CHARGER
REC MEM FULL
RINGER MUtED
SAVED
SPEAKER
UNABLE tO CALL.
tRY AGAIN
UNABLE tO SAVE
XX MISSED CALLS
XX NEW MESSAGES
Communication between handset and
telephone base is lost during a call.
One handset is already viewing the call
log or directory and another handset
attempts to review it.
The handset cannot communicate with
the telephone base. Check the telephone
base power connection or move closer.
The system handset is being paged.
The handset is on a call.
The battery is very low. Place the
handset in the telephone base or charger
for recharging.
Answering system has no recording
time left.
The ringer is muted temporarily during an
incoming or intercom call.
Your selection has been saved.
The handset speakerphone is in use.
You have attempted to make an intercom
call, but the handset you are calling is in
the directory, in the call log, out of range
or on an outside call.
You are attempting to save a caller ID
entry without a name and number.
There are calls that have not been
reviewed in your call log.
There are new messages in the
answering system.
44