Home Area Code; Dial Mode - VTech CS6328-2 User Manual

Telephone settings

home area code

If you dial your local calls using only seven digits (area
code not required), you can program your home area code
so that when you receive a call within your local area, the
telephone number is automatically stored without the area
code in the call log.
1. Press MeNU/
2. Press VOL/
then press
MeNU
3. Press VOL/
> hOMe AreA CODe, then press
4. Use the dialing keys to enter the desired home area code.
• Press
MUTe
• Press and hold
/SeLeCT to confirm.
5. Press
MeNU
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed, following the
steps above. After you have deleted the home area code, _ _ _ will appear in
the display.

Dial mode

The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
1. Press MeNU/
VOL/
2. Press
then press
MeNU
VOL/
3. Press
then press
MeNU
VOL/
4. Press
or PULSe.
/SeLeCT to confirm your selection.
5. Press
MeNU
While on a call, press
when the handset is not in use.
SeLeCT
or VOL/
CID
/SeLeCT.
or VOL/
CID
/reMOVe to delete a digit.
/reMOVe to delete the entire entry.
MUTe
when the handset is not in use.
SeLeCT
VOL/
or
CID
/SeLeCT.
VOL/
or
CID
/SeLeCT.
VOL/
or
CID
TONe
to select > SeTTINGS,
to select
/SeLeCT.
MeNU
to select > SeTTINGS,
to select > DIAL MODe,
to choose TONe
to temporarily change to tone dial mode.
13
>HOME AREA CODE
DIAL MODE
HOME AREA CODE
___
>DIAL MODE
LCD LANGUAGE
DIAL MODE
>tONE