Alert Tones - VTech CD1291 User Manual

Appendix

Alert tones

Beep
(Key tone)
Beeeep
(One short beep)
Beeeeeeeep
(One long beep)
Three short high-pitched
beeps
(Confirmation tone)
One long low-pitched
beep
(Error tone)
Beep-beep every 15
seconds
(Message alert tone)
Four high- then low-
pitched beeps
(Priority call tone)
Beep-beep-beep
(Volume alert tone)
A key is pressed.
Command of the answering system is completed
successfully.
The answering system begins to record an
announcement or a memo.
Command is completed successfully.
• Command has failed.
• The number you entered in the one-touch memory
location, speed dial memory location or directory is
over 24 digits.
• The name you entered in the directory is over 15
characters.
• There are no telephone numbers stored in the
directory.
• There are no call history entries.
• You have reached the end of the directory records.
• You have reached the end of the call history.
• There is no telephone number in the one-touch
memory location you dialed.
• There is no telephone number in the speed dial
memory location you dialed.
• There is no telephone number in the call history entry
you dialed.
There are new messages.
The incoming call is a priority call.
The volume (handset, speakerphone or message
playback) has reached the maximum or minimum.
54