Specification; Regulatory Compliance - Crestron CLS-EXP-DIM Specfications

CLS-EXP-DIM
CLS-EXP-DIM Specifications (Continued)

SPECIFICATION

Compatible Control
Devices
CLS(I)-C6 iLux Integrated Lighting System
CLW-DIM Series Wall Dimmers
CLX(I)-1DIM4 Four Channel Dimmer Module,
Single Feed
Eight Channel Dimmer Module,
CLX-1DIM8
Single Feed
CLX(I)-2DIM2 Two Channel Dimmer Module, Two
Feeds
CLX(I)-2DIM8 Eight Channel Dimmer Module,
Two Feeds
DIN-1DIMU4* DIN Rail Universal Dimmer
* DIN-1DIMU4 must operate in FWD mode.

Regulatory Compliance

This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. These devices have
been additionally evaluated to UL 2043, The Standard for Fire Test for Heat and Visible Smoke Release for Discrete
Products and Their Accessories Installed in Air-Handling Spaces.
As of the date of manufacture, the CLS-EXP-DIM has been tested and found to comply with specifications for CE marking.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

2 • iLux Expansion Module: CLS-EXP-DIM
DETAILS
iLux Expansion Module
Installation Guide – DOC. 6638E