Table of Contents
Advertisement
Chapter 2
Using DMPDM
Log in with the factory default username admin and the factory default password default.
Step 4
Reconfigure your DMP. See Quick Start Guide for Cisco Digital Media Player 4300G.
Step 5
Restarting Your DMP
You can restart your DMP.
In the Administration list, click Reboot DMP.
Step 1
When the Reboot DMP page appears, click Reboot.
Step 2
Upgrading the DMP Firmware
You can install an update to the firmware for your DMP.
In the Administration list, click Upgrade Firmware.
Step 1
When the Upgrade Firmware page appears, click Browse, navigate to the binary file that contains the
Step 2
firmware update, then select that binary file.
Click Start Upgrade.
Step 3
Note
Table 2-14
GUI Elements on the Upgrade Firmware Page
Field
Upgrade Firmware
Image File
Upgrade Status
{Current | Last}
Upgrade Status
Progress
Last Upgrade Status
OL-12472-01
Until messages in DMPDM tell you that your DMP has loaded the firmware image and started
to burn it, do not click any link or button to move away from this page. If you move to any other
page before your DMP tells you that it has started to burn the upgraded firmware image, the
upgrade does not occur.
Description
The full pathname to the binary file. If you do not know the full pathname, click Browse.
Indicates whether a firmware upgrade is in progress or shows information about the most
recent upgrade.
FW upgrade not active — There is no upgrade in progress.
•
Upgrade succeeded — The upgrade finished and there were no errors.
•
Indicates what percentage of the update is complete, or shows that no update is in progress.
Tells you when you most recently updated the firmware for your DMP.
User Guide for Cisco Digital Media Player Device Manager 1.0
Using Administrative Options
2-19
Advertisement
Table of Contents
