Table of Contents
Advertisement
Chapter 2
Using DMPDM
Table 2-2
GUI Elements on the Browser Page (continued)
Element
Adobe Flash
Transparency Source
Screen Rotation Angle
(Clockwise)
Browser Transparency
(0-255)
Splash Screen Display
Time (milliseconds)
Screen Height (pixels)
Screen Width (pixels)
Adjusting DMP Display Settings
You can configure DMP to optimize content for transmission to your particular DMP display.
In the Settings list, click Display.
Step 1
Enter or edit the required values, as described in
Step 2
To confirm that you are satisfied with the entries or changes that you made and to record them in volatile
Step 3
memory, click Apply.
After you click Apply, the entries or changes take effect. However, the previously defined values will
return as soon as the next time that your DMP restarts.
(Optional) To put all changed values into effect permanently, so that they persist even after your DMP
Step 4
restarts, select Administration > Save Configuration and, when the Save Configuration page appears,
click Save.
OL-12472-01
Description
Indicates which method determines the amount of transparency that DMP applies to Flash content
that you show on the HTML content plane.
Browser — Your selections while you were
•
Plane, page
2-12, determine the amount of transparency for Flash content.
SWF — The author of any given Flash file determines the amount of transparency for that
•
content element.
We recommend that you do not change the factory default for this setting.
Note
Indicates whether you have rotated the HTML content plane and shows the amount of rotation. You
might choose to rotate the HTML content plane if you have rotated your DMP display.
Note
The rotation feature applies only to content that plays on the HTML content plane. To play
video vertically, you must first encode it vertically.
Note
Although this setting might look identical to a setting described in the
Transparency of the HTML Content Plane" section on page
use this setting to configure transparency for the browser.
The amount of transparency that you configure for all content that your DMP shows in the
embedded browser. Values can range from 0 to 255, where:
•
0 — Content in the browser is completely transparent.
255 — Content in the browser is completely opaque.
•
Indicates in milliseconds how long the splash screen persists on your DMP display when you start
or restart your DMP.
Indicates the HTML content pane height in pixels. You might change the browser height, for
example, to show a small ticker at the same time that you show a video.
Indicates the HTML content pane width in pixels.
Adjusting the Transparency of the HTML Content
Table
2-3.
User Guide for Cisco Digital Media Player Device Manager 1.0
Configuring Settings
"Adjusting the
2-12, they are different. You
2-5
Advertisement
Table of Contents
