Group Call - Siemens OpenStage 20 E Operating Manual

Basic functions
Step by Step
Pickup call?
Ignore?
26

Group call

Your administrator can incorporate multiple telephones
in a call pickup group. If your telephone belongs to a
pickup group, you can also accept calls intended for oth-
er members of the group.
Your administrator may have made the following set-
tings for group calls:
• The call is displayed on the phone but not signaled
audibly.
• The call is displayed on the phone and signaled by a
set ringtone.
• The call is displayed on the phone and only signaled
by an alerting tone.
• The group call can be picked up both by lifting the
handset and via the "Pickup call" menu option.
• The group call be picked up via the "Pickup call"
menu option but not by just lifting the handset.
• A key is programmed for call pickup.
A group call is waiting and is indicated on the display by
Pickup: Caller
for: Party
.
Picking up a group call
The pop-up menu opens:
l
Confirm.
or
^
Lift the handset (only if the appropriate function is set
by your administrator)
or
R
Press the sensor key programmed with the "Call pickup"
function (if configured). The speakerphone function is
activated.
Ignoring a group call
f
Select and confirm the option shown. The phone stops
signaling the group call.