Siemens OpenStage 20 E Operating Manual page 67

Step by Step
User
Security?
User password =
Delete
Confirm password =
Option = Save & Exit
Deactivate User Password
If a password has been set beforehand, you can disable
the password prompt at the phone.
The deactivation of the password request is not
valid for the web interface
the OpenStage Manager, and also not for CTI ap-
plications requiring a password request. Here,
you must enter "000000" as password.
If you deactivate the user password, you cannot
lock the phone
user menu is not password protected.
z The User password can also be modified via the Web in-
terface
N
Press this key repeatedly until the "Settings" menu be-
comes active.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
f
Select and confirm the option shown.
if nec.
f
Select and confirm with OK key from left to right to de-
lete the old password.
j
Enter 6 zeros ("000000") to deactivate the password (for
text entry, see
m
Select and confirm the option shown.
j
Enter 6 zeros ("000000") once more and confirm.
l
Select the option shown and confirm twice.
page 68 any more, and the
page 101.
page 15).
Privacy/security
page 101, not for
67