Basic Functions; Secure Voice Transmission; Answering A Call; Answering A Call Via The Handset - Siemens OpenStage 20 E Operating Manual

Basic functions

Step by Step
+
if nec.
20
Basic functions
Please read carefully the introductory chapter
"Getting to know your OpenStage phone"
described here on your phone.

Secure voice transmission

Prerequisite: The secure voice communication option
must be activated by your administrator.
If you call a party or receive a call from a party over a se-
cure connection, a padlock icon
party's row on your graphic display. If desired, a brief
alerting tone and a window with the message "Call not
encrypted" will indicate that a secure call has become
insecure (see

Answering a call

Your OpenStage phone rings with the tone signal set
when an incoming call is received. The call is also visu-
ally signaled on the call display.
If transmitted, calling party information (name, phone
number) appears on the display.
An incoming call will interrupt any ongoing tele-
phone setting operations. When the call ends,
you can press the N key to return to the point
in the menu structure where you were interrupt-
ed.

Answering a call via the handset

The phone is ringing. The caller is displayed.
^
Lift the handset.
-
or
Set the call volume.
1. Closed for secure or open for nonsecure voice communication
page 10 before performing any of the steps
page 97).
1
appears on the other