Making Anonymous Calls; Deactivating; Activating - Siemens OpenStage 20 E Operating Manual

Step by Step

Making anonymous calls

Your administrator decides whether or not your caller ID
(name and phone number) is displayed on a called par-
ty's station. Anonymous calling is when your data is
not transmitted. The settings configured can be deacti-
vated, however, for specific calls.
• If your caller ID is transmitted: your caller ID is
displayed.
• If your caller ID is suppressed: "Unknown" is
displayed.

Deactivating

If your administrator permanently activated anony-
mous calling for your phone, you can deactivate this
setting as follows:
^
Lift the handset.
j
Enter the access code (see access code table
page 87) to transmit the caller information.
Z
You hear a confirmation tone.

Activating

If your administrator activated caller ID transmission for
your phone, you can deactivate this setting as follows:
^
Lift the handset.
j
Enter the access code (see access code table
page 87) to suppress the caller ID.
Z
Wait until you hear the confirmation tone.
Caller ID transfer is suppressed. "Private/Anonymous"
appears on the called party's display instead of the call-
er ID .
HiPath 8000 functions
79