Siemens OpenStage 20 E Operating Manual page 53

Step by Step
User
Configuration
Incoming calls?
CTI calls?
Auto-reconnect = No
Yes
Beep on auto-unhold = No
Yes
Option = Save & Exit
Beep on auto-reconnect
When active, this option lets you resume a held call
with either the CTI application or phone. A beep sounds
when you toggle between an active call and a held call
when the function is active.
Prerequisite: The option was programmed by your ad-
ministrator.
z You can also configure this setting via the Web interface
page 101.
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Select the option shown and confirm twice.
Enhanced phone functions
53