Vision Fitness Fitness Cycle Owner's Manual page 31

MANUAL CONSOLE
(Models R2000, E3000)
Your easy to use Vision Fitness Manual computer console provides the informa-
tion you need to monitor your progress toward your personal fitness goals.
INSTALLING BATTERIES
Your Vision Fitness Manual console uses two size AA batteries. These batteries
are located in a snap open battery compartment in the back of the console. If your
Fitness Cycle batteries have not already been installed by your dealer, please install
them now.
TURNING SCREEN DISPLAY ON
To turn the screen display on, either press any console button or turn the pedals one complete revolu-
tion. When the display first comes on, '0:00' will be flashing in the TIME window.
TURNING SCREEN DISPLAY OFF
The screen display will go off automatically after 5 minutes of non use.
CHOOSING TIME AND STARTING
There are two ways to use the timer: Count Down Mode or Count Up Mode.
Count Down Mode
Press the SET TIME button to enter your workout time. When the time you choose is showing in the
TIME window, start pedaling. The timer will begin counting down to zero. When the workout time is
completed, the console will beep and the screen will flash.
Count Up Mode
To use the timer in count up mode, simply start pedaling when '0:00' is flashing on the screen.
PART 3
30 Heart Rate Control Console
Vision Manual Console