Indexed Consoles; (Models R2100, E3100, E4100) Installing Batteries; Setting Miles Or Kilometers; Turning Screen Display On - Vision Fitness Fitness Cycle Owner's Manual

INDEXED CONSOLE
(Models R2100, E4100, E3100)
Your easy to use Vision Fitness Indexed compute console provides the information
you need to monitor your progress toward your personal fitness goals.
INSTALLING BATTERIES
Your Vision Indexed console uses two size AA batteries. These batteries are locat-
ed in a snap open battery compartment in the back of the console. If your Fitness
Cycle batteries have not already been installed by your dealer, please install them
now.
SETTING CONSOLE FOR CORRECT MODEL
Vision Indexed Console
When the batteries are first installed, ' E4100 ML' will be blinking in the SPEED -
DISTANCE window. Use this setting for the model E4100 if you wish to view speed
and distance in miles. If you have the model R2100 or E3100, press any button to change the display until the
console displays: 'R2100 ML'.If you wish to view the speed and distance in kilometers, press any button until
either 'E4100KM' shows for the model E4100, or 'R2100KM' shows for the model R2100 or E3100. After you
have selected the correct model and mile or kilometer setting, wait 30 seconds for the console display to stop
blinking. After 30 seconds the console will beep, and '0:00' will begin flashing in the time window. The selection
you have made will remain in the console program until the batteries are removed. If you wish to change the
selection, remove the batteries and reinstall them. You can now select the model again.

TURNING SCREEN DISPLAY ON

To turn the screen display on, either press any console button or turn the pedals one complete revolu-
tion. When the display first comes one, the console will beep and '0:00' will be flashing in the TIME win-
dow.
Choosing Time and Starting
There are two ways to use the timer: Count Down Mode or Count Up Mode.

Count Down Mode

Use the UP or DOWN arrows to enter your workout time. Times of between 1 and 99 minutes can be selected.
When the time you choose is showing in the TIME window, press the START•STOP button. The timer will begin
counting down to zero. When the workout time is completed, the console will beep 3 times and the screen will flash
3 times.

Count Up Mode

To use the timer in count up mode, simply press START•STOP when '0:00' is flashing on the screen. The
timer will count up till 99 minutes. When 99 minutes are reached, the console will beep 3 times and the
screen will flash 3 times.
PART 3
27
Indexed Console