Ten Feedback Functions; Scan On/Off - Vision Fitness Fitness Cycle Owner's Manual

TEN FEEDBACK FUNCTIONS

Once a program has begun, you may use the SELECT button to view the data of your choice
on the number screen. The light next to the function name indicates which data is currently displayed.
The following functions can be viewed:
DISPLAY DATA
LOAD (Watts)
SPEED
AVERAGE SPEED
RPM
DISTANCE
CALORIES
CALORIES PER HOUR
PROGRAM LEVEL
TIME
WEIGHT
SCAN ON•OFF
When the SCAN button is pressed, the red LED next to 'SCAN' will light up
indicating Scan is on. When Scan is on, the number display will cycle between each data function
(except weight) showing a new data display every four seconds.
To turn Scan off, press the SCAN button again. The Scan light will no longer be on.
PART 3
20
Programmable Console
USE THIS FUNCTION TO:
Evaluate your fitness progress over time.
Compare your performance to simulated outdoor cycling speed.
Set personal average speed goals for a specific program at a
specific level. A faster average speed is an indication of
improved physical conditioning.
Improve cycling technique while reducing leg muscle fatigue by
pedaling at between 80 and 100 RPM's.
Set personal goals for covering greater amounts of distance for
each program. You can log mileage as a motivational tool.
View your total calorie expenditure.
View the rate you are currently burning calories.
View the current program level selected.
View the time remaining if the count down mode is used, or
view the elapsed time if the count up time mode is used.
Used to calculate more accurate calorie expenditure.