Select And Start A Washing Program - Electrolux EX601SC User Manual

Follow these steps if the drying re-
sults are not satisfactory:
1. Fill the rinse aid dispenser with rinse
aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
• You can only activate or deactivate
the rinse aid dispenser when the
multitab function is activated.
To activate/deactivate the rinse aid
dispenser:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons B and
C.
– The indicator lights for function but-
tons A, B, and C start to flash.

SELECT AND START A WASHING PROGRAM

Set the washing program with the door
ajar. The washing program only starts
after you close the door. Until then it is
possible to modify the settings.
Follow these steps to set and start a wash-
ing program:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press one of the program buttons. Refer
to the 'Washing programs' chart for
program details.
– The indicator light of the selected pro-
gram stays on. All other program indi-
cator lights go off.
– The digital display shows the program
duration.
4. Close the door.
– The washing program starts.
When the washing program operates,
you cannot change the program. Can-
cel the washing program. Refer to
'Cancelling a washing program'.
Select and start a washing program
with delay start
1. Press the on/off button.
2. Set a washing program.
– The program indicator light comes on.
4. Press function button B.
– The indicator lights for function but-
tons A and C go off.
– The indicator light for function button
B continues to flash.
– The digital display shows the setting.
5. Press function button B again.
– The digital display shows the new set-
ting.
6. Switch off the appliance to save the op-
eration.
To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the rinse aid dispenser.
3. Adjust the rinse aid dosage.
3. Press the delay start button until the dis-
play shows the necessary delay start of
the washing program.
– The delay start indicator light comes
on.
4. Close the door.
– The countdown of the delay start
starts.
– When the countdown is completed,
the washing program starts automati-
cally.
If you open the door during the count-
down, it will interrupt the countdown.
When you close the door again, the
countdown continues from the point of
interruption.
Cancelling a delay start
1. Press and hold function buttons B and
C until all the program lights come on.
– When you cancel a delay start, you al-
so cancel the washing program.
2. Set a new washing program.
Warning! Only interrupt or cancel a
washing program if necessary. Open
the door carefully. Hot steam and
water can escape.
electrolux 11
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated