Select And Start A Washing Program - Electrolux ESF 66060 User Manual

Follow these steps if the drying re-
sults are not satisfactory:
1. Fill the rinse aid dispenser with rinse
aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
• You can only activate or deactivate
the rinse aid dispenser when the
multitab function is activated.
To activate/deactivate the rinse aid
dispenser:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons B and
C.
– The indicator lights for function but-
tons A, B, and C start to flash.
4. Press function button B.
– The indicator lights for function but-
tons A and C go off.
– The indicator light for function button
B continues to flash.
– The digital display shows the setting.

SELECT AND START A WASHING PROGRAM

Set the washing program with the door
ajar. The washing program only starts
after you close the door. Until then it is
possible to modify the settings.
1. Press the on/off button.
2. Make sure that the appliance is in set-
ting mode.
3. Press one of the program buttons. Refer
to the 'Washing programs' chart for
program details.
– The program indicator light comes on.
– The Washing indicator light comes
on.
– The flashing digital display shows the
program duration.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
5. Press function button B again.
– The digital display shows the new set-
ting.
6. Switch off the appliance to save the op-
eration.
To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid
dispenser.
3. Adjust the water hardness setting
to the highest level.
4. Do a washing program without
dishes.
5. Adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the rinse aid dosage.
4. Close the door.
– The washing program starts automat-
ically.
– The program indicator light and the
Washing indicator light stay on.
When the washing program operates,
you cannot change the program. Can-
cel the washing program. Refer to
'Cancelling a washing program'.
Select and start a washing program
with delay start
1. Press the on/off button.
2. Set a washing program.
3. Press the delay start button until the dis-
play shows the necessary delay start of
the washing program.
electrolux 13