Select And Start A Washing Programme - Electrolux FAVORIT 44010 VI User Manual

Table of Contents

Advertisement

Programme
2)
AUTO
3)
30 MIN
4)
ECO 50°
1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water
and also by the variations of the power supply and the amount of dishes.
2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water
is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance
is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is
automatically adjusted between 45° C and 70° C.
3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs
of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
4) Test programme for test institutes.

Select and start a washing programme

Select the washing programme and delay start with the door slightly opened. The
start of the programme or the countdown of the delay start will occur only after
the closure of the door. Until then it is possible to modify the settings.
1. Check that the baskets have been loaded correctly and that the spray arms are
free to rotate .
2. Check that the water tap is opened.
3. Press the On/Off button: all the programme lights illuminate (setting mode).
4. Press the button corresponding to the required programme (see "Washing
programmes" chart). The light corresponding to the selected programme will
illuminate.
Degree of
Type of
soil
load
Mixed nor-
Crockery,
mal and
cutlery,
heavy soil
pots and
pans
Light soil
Crockery
and cutlery
Normal
Crockery
soil
and cutlery
Select and start a washing programme
Programme description
23
Consumption val-
1)
ues

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FAVORIT 44010 VI and is the answer not in the manual?

Questions and answers

Table of Contents