Table of Contents
Advertisement
SIMPRD 342-1-483
1/3/06
11:00 AM
Page 16
U S I N G Y O U R O V E N
C o o l i n g / Ve n t i n g f a n
Your built-in appliance is fitted with a cooling fan. It will operate whenever you are using your
oven and blow warm air across the top of the oven door. In some appliances the cooling fan may
continue to operate after the appliance is turned off, to cool the product.
C o n d e n s a t i o n
Condensation fogs the oven door. This may happen when you are cooking large quantities of
food from a cold start. You can minimize condensation by:
• Keeping the amount of water used whilst cooking to a minimum.
• Making sure that the oven door is firmly closed.
• Baking custard in a baking dish that is slightly smaller than the water container.
• Cooking casseroles with the lid on.
NOTE: If you are using water in cooking, this will turn to steam and may condense outside your
appliance. This is not a problem or fault with your oven.
NOTE: Cooking in just your bottom oven may cause condensation in your top oven, due to the
rising movement of hot air. It is recommended to cook in your top oven to avoid this problem.
O p e r a t i n g y o u r o v e n t e m p e r a t u r e s e l e c t o r
A thermostat controls the temperature in your appliance. The
temperature can be selected within the specified range. To set the
temperature, turn the temperature selector in a clockwise direction to
the desired setting. An indicator light above the temperature selector
will come on. When the temperature is reached, the heating source
switches itself off and the indicator light goes out. When the oven
temperature falls below the desired setting, the heating source
switches on and the indicator light comes on again. Once the food is
cooked, turn the temperature selector back in an anti-clockwise
direction. Do not force it right round in a clockwise direction as this
will result in damage to the thermostat.
NOTE: For multifunction ovens the desired cooking function must be selected before the oven will
operate. Once the desired function has been selected, use the temperature selector to set the
required temperature.
O p e r a t i n g y o u r s e p a r a t e g r i l l t e m p e r a t u r e s e l e c t o r
An energy regulator controls the temperature within your separate
grill. The temperature can be selected within the specified range. To
set the temperature, turn the separate grill temperature selector to
the desired setting. An indicator light above the temperature selector
will come on. When the temperature is reached, the heating source
switches itself off and the indicator light goes out. When the grill
temperature falls below the desired setting, the heating source
switches on and the indicator light comes on again. Once the food is
cooked, turn the separate grill temperature selector back to the off
position.
16
Hide quick links:
Advertisement
Table of Contents
